Ideas for homemade chastity devices

Very ingenious idea also awesome craftsmanship

 

Phinchy's crazy. Keep up the good work, you are one of a kind.

 

Fantastic

 

Very nice work, inverted devices keep a sissy in her place.

 

If you have a steel hex socket set in your toolbox, you can use a socket to convert a flat device into a inverted one by simply putting a socket inside. The nice thing about a socket set is they come in graduated sizes, so you can experiment to find the diameter and depth that suits.

 

I will never look at my socket set in the same way ever again

 

A sissy can never have enough tools, off she goes to Harbor Freight .

 

Well done in putting that together. I would be interested to know how secure you find the glans loop arrangement. I don't like ball trapper devices after having a hernia fixed, so I tried asimilar loop arrangement with a ringless device some while ago. It appeared to be very successful for a while, until I went for a swim in a cold pool. After that I could get out of it easily. For a while I gave up and resorted to my full belt. That does restrict movement somewhat, so I have recently tried again with the loop device. I've been locked in it for the last few days. I have not been able to get out so far, even after swimming. I just hope it stays that way.

My photos have some pictures of my device, although I have altered the shape of the loop since then. I have used a thicker wire, made it tighter and made the narrow end of the loop quite a bit narrower. I was a bit concerned about the safety of such an arrangement, but it seems to be OK so far.

 

You have made some very nice devices. For me the inverted cages are the best, they are simple, very secure, and the most comfortable. I am going to make an inverted device that pushes the little part further back into the body. I would like to electrify it so the TENS unit could be used to give the sub/sissy a little pain or a little pleasure. In order to keep the positive and negative electrodes from shorting, I will use a plastic sparer between the internal parts.

 

Not a homemade device, but a source for anyone considering making one.

If an ergonomic ring suits you better than a circular one, then making a device that is comfortable can be a challenge. This is a cheap option for making a device, a plain ergonomic ring that will fit well and give you a good base for any alternative design of cage or torment that you might be considering building...

https://vi.aliexpress.com/item/1005005457872979.html

 

You can turn a pair of boxers/trunks into a makeshift full-chastity belt with a padlock. Here is how.

Pull the back up, creating a g-string, then gather all of the material just above your cage together creating a codpiece type of thing, and then hook the padlock around the material. Click. You can pierce through the material to prevent it slipping upwards. Hey presto, all tightly bound and snug.

 

Will you show me a picture of it?

 

Nice work. Aluminum is easier to work with than stainless-steel, how does it react to the body over time? I am in an inverted device that keeps the little part securely compressed into sissy's body. It is very small and has no big lock, just two screws and cable around the waist to keep everything in place. It is very secure and most comfortable. Keep up the good work.

 

Good work. Looks like it would keep the little thing out of trouble. I like screws instead of locks, simpler, inexpensive, and secure. I sissy does not have access to the right tool, they are as good as a lock.

Keep up the good work to keep the little thing down.
Lisa

 

Years ago, I found some plans on-line to make a home made full belt. I used sheet metal for the belt and a PVC pipe fitting for the tube. The edges were covered with rubber tubing that was glued in place. My plan was to try to settle on a design and size using inexpensive metal, then use it as a pattern after I had things dialed-in. It actually worked ok, though wasn't really for long-term use. I had always hoped to either get my hands on, or have someone measure a "real" belt for me so I could improve upon it.

I also made a glans-armor type cap with pvc pipe fittings and some stainless steel rings I bot at the hardware store. The ring went around the glans, then the pipe went over the whole thing. There was a cut-out in the pipe where I could access the bottom part of the ring and insert a small padlock to keep it attached.

If you have the tools and the time ( and skill, or time to develop the skill) you can pretty much make any style belt or cage. Now that 3d printing is everywhere, it's also pretty easy to print your own cage. I've probably done 10 of them at this point as I dial in fit, etc. and wear a 3d printed one that I made when I'm not in my BB belt.