I just saw this cage, but I can't find who makes it- anyone know who makes this locking system or at least what it's called?
Wow, that does look tricky to remove! You'd need some small tools to undo that clip, and they'd be pointing to a pretty sensitive area. You wouldn't even attempt to get out unless it was a serious reason!
ive seen it on dhgate in the past but not sure if they are still making it. Looked a little while ago and couldnt find it again.
Yes, but look at the location. To undo it, you'd have to put a fair amount of pressure. One slip can be pretty painful.
But if you look close it looks like a raised section at each side on the outside of the clip. The ends might be low enough that it will be hard to get under it to lift it up and off. not saying that in can not be done but could be a challenge.
Okay so this is an "e" clip and there are several tools from any hardware store to remove them. they are plier looking tool and very low profile so it should pinch or pull..
Sorry to say that it is not permanently locked. That is simply a lock washer. I used them on attaching things to my rifles. They prevent the screw from backing out of the hole. This one seems to have a little bump at the top so a little bit will be showing that can be grabbed with needle nose pliers. Not many people practicing chastity for real will risk the danger of wearing a cage that cannot be removed easily in an emergency. I do not think they will sell a lot. I can put one of those washers on my Jailbird security screw to keep it from backing out. They also can be removed from the bottom by any device that pushes it up. The sides will spread with pressure from the bottom. I have a tool to do that. Even without a special tool, it is not that difficult to remove.
I still think it is a cool locking system that would be used creatively. Here is the original cage http://www.dhgate.com/product/new-s...recinfo=8,103,1#cppd-1-5|null:103:r1297414523 Here is one that also uses the washers to lock the balls http://www.dhgate.com/product/2017-...stity/397873933.html#s1-3-1b;searl|1065139841 Here is one with a dual locking system http://www.dhgate.com/product/male-...-cock/391897369.html#s1-0-1b;searl|3751717383 It certainly makes it harder to unlock- especially if you had to pull out more than one. Imagine having even a couple of those bars with multiple washes in each. Your owner would get bored of fishing them out long before you were unlocked
Bad ass workroom, which I think also sells under smbsm, makes custom cages with the e clip. Some details are here bur you can read more on the designs that feature the clip in the lock. https://badassworkroom.com/pages/all-about-chastity-cage-customization
If the cage is made of on stainless steel and the clipnis made of usual metal it can just be pulked out by a magnet. what would make a nice key for the KH.
For the naysayers about how permanent this is. Yes they make tools but I think it would be rather difficult to get them into the space and get the clip out. It also looks like the cage would be in the way from getting under the clip to push it off the post. Nothing is impossible but this would be challenging for sure.
I agree. While an accessible e-clip groove would allow you to pop the clip off either by getting a jewelers screwdriver tip under the top of it, or pushing it up on both sides of the groove, the cage shown has pins on each side of the e-clip groove. That would make it damn hard to get the e-clip out, especially when you are already locked in it. The idea of using a magnet might be possible, but some of those snap rings fit pretty tightly. The difficulty could be increased by making the tube diameter bigger than the e-clip diameter, thus keeping a magnet from actually contacting the e-clip. Intriguing and interesting...
I ordered a cage that has the clip option which I declined. I think snap ring pliers would work to off the clip but like others have said it would be rough if you’re in a hurry or very bad if you slipped
not sure if it's clear from the thread, but these pictures are from the Badass Workroom ('BAW') website
It's an option on most badassworkroom cages, by the look of it: https://badassworkroom.com/pages/all-about-chastity-cage-customization