I am currently unlocked from my broken HTv2, and my wife is coming round to relocking in steel. I am researching the JB; I am a person who is tight when cold but mostly loose, and uncut. Regardless of dimensions,I would welcome comments on the following.. I wonder what the "perfect design would be? I suggest a double oval ring, with the ring at the head, being in the inside so it sits behind the exposed head, and the bars going down the length, on the outside. This setup poses some questions for me. 1, does the ring sit behind the head of the exposed penis? 2. What would happen to the pulled back, loose foreskin? 3. Would the ring cause pressure against the head? 4. Would MM have to know the length of the exposed head?
#1 & 4 If you are wanting specific placement of the head ring, yes we will have to know exactly how far back you want it. Some cages fit the head portion behind the head, and some head rings are around the head portion. #2 the pulled back skin will slide forward after time. At least that is what happens to William. #3 you should not have a problem as long as your cage is sizes correctly. We suggest before you jump into a double base ring (DBR) that you make sure the single base ring is the correct fit since a DBR can never be adjusted in size. You can then send the ring back to us to be made into a DBR. We do not recommend the DBR for those high and tight. Thanks M MM
Thanks for your reply M MM. I note that you mentioned in another post that just about everyone gets high and tight when cold, but would loosen Up under normal circumstances , and if you're high and tight you're always high and tight. So with that in mind I wouldn't say I was high and tight.