Yes I purchased a 3D printed ring and cage - Shipped from the east coast took about week to arrive. I based my size of things from my small Chinese metal cage setup. Metal setup was 45 mm ring at super small cage. 3D I went with 44mm make it a little bit more snug- Cage I went with small cherrykeeper with 3.0 med head keeper. The material is rough so I don't 3 sanding over the last 3 weeks - I sanded the ring and the opening and headkeeper on the cage - I was using wet/dry paper 220, - 600 - finish with 1000 grit. It not polished but a lot smoother to the touch- I also sanded the edges off the ring and cage connection just a bit to round the edge- in addition I gave the cage outside ring a little more rounded edge since it sit snug against my balls I purchased white but does show up the dirt and kinda goes grey color after a few days - If I take off and give it a good washing mostly get clean Only thing I might change is the pee opening it just a hint to big - when trying to get aroused I push though the opening some - I planning in Jan to purchase a same model but with a reduced opening but bigger than my metal The headkeeper I don't turtle I don't pull out - it keep my head full in the cage I slowing adding days to check for any sore issues till I get use to it - I am using a metal magic lock from a holytrainer - I have purchased and plastic lock that would replace the metal lock - I just have not found easy locking method - I don't want to use a cheap plastic tag -- I post a pic of cage in my gallery and post a pic of the plastic magic lock Overall Easy to wear Easy to clean I don't pull out Light weight Hides well under cloths Long term - we will see it better than the CB series - I had many issues with ring and cage breakages - My cheap metal I was able to basically wear year and half with very little time out I did go through a skin issues but they went away with my metal cage Great communication with the creator
Thank you for sharing your experience - I appreciate all the feedback on what is already good and what could use improvements. I've been working to find the best answers to the texture, and there are two improved offerings that I know I will make available in the new year.
I used a small plastic zip tie through the plastic lock - it a clean look but not secure in that sense
If you're using the option I think you are, that is designed for the plastic numbered locks, so not secure unless enforced by punishment for cutting it off
I have post pics in the gallery - made a new album waiting for admin to approve - zip tie works and is clean and simple but not really secure - but it might just the setup I go with for awhile
I have used seals on my metal cage - trying to find something in plastic - that will give a clean look on the plastic cage and lock
If you already have a compatible lock (i.e. magic locker aka HT lock aka integrated lock) You just need a ring and a cage. If you need a lock, order the "Chastity Lock Cylinder" also.
The finish coming out of the printer is unlikely to change. There is a premium process offered by a different printer that offers a slipperier surface, but it still has a slight texture. If smoother surfaces are required, 600 grit wet sanding is capable of providing a texture-free surface
Hi there, any update on how this has worked out for you? I am very interested in this kind. thanks for the post.
I over sanded the second ring so work through it -- The fit has been good - the second ring I had the gap reduced by titlting the lock connection on the ring more forward