Hi there. I am here because I love the idea of life a chaste life. I would prefer nothing more than to be locked up 24/7 and only allowed to be let out when my Mistress wishes. Like many of you, I have entered this world with much interest and curiosity as to which device will best serve my emotional and physical needs for a comfortable and secure device. I went through the process of getting a PA piercing in order to allow for a more secure device, and have since tried various devices and kept my eyes open for new ones that may help me reach my goal of finding the perfect device.
Unfortunately, not one of the devices I have tried has worked "perfectly" for me, and as such I have continued to spend a substantial sum of money in the pursuit of perfection.
At first, I attempted to use the CB3k. I was very excited to receive this device, and getting to use it for the first few days was quite the learning experience. Between nighttime/morning erections, and learning to sit to pee with my new PA piercing, and discovering how best to dress to hide this new bulge in my pants. Not long after putting the device on, I learned the importance of sizing and just how dangerous it was to use pieces that were too tight or too small or even too loose. The noise of the lock banging against the cage quickly became another problem to solve. I soon began searching for a method of properly securing this device to prevent removal and ejaculation, and through multiple ventures I was inevitably unsuccessful due to either my anatomy or the incompatibility between my penis and the cage. Within 6 months I was searching for a new device.
The next device I tried was the CB6ks. A logical progression in terms of the size and added ability to conceal. The device seemed better sized for my penis and with an evolved design gave me hope that I would find the perfect device to keep me locked and secure forever. This was obviously not the case. This device had improved in several ways over the CB3k, but did not solve every problem I was having. I used this device intermittently with various security measures for about a year until it cracked in half at the seams, and soon my search again began.
I came to the realization that the only way to find perfection was to design a device using custom measurements. Enter the Lori 2b. The device pictured was not mine, but looked almost identical. I purchased with the recessed security screw, and the swinging/hinged PA pin. Before ordering, I knew in my mind that this device would surely meet every expectation I had and would perform flawlessly. Unfortunately I fell victim to my own inexperience. I measured well, but not perfectly, but this was not my undoing. The weight of this device was nothing to joke about. The pressure it put on my PA piercing was painful and problematic. Due to the design of this device, hygiene was very difficult. Because this device was hand made, it came with some imperfections. The measurements were slightly larger than my specifications which turned out to be a serious problem. I sent the device back for modification, but after an excess of $700 had been spent on this device and the keys and the 4 month waiting time for initial delivery, I learned in less than a week that this device was far too heavy, too big, and potentially very damaging for my anatomy. I was forced to sell this device and continue my search. The fault was not solely in my manufacturers hands, I made the mistake of thinking a device with this design and level of security would be perfect for every day wear, but I was very wrong.
My next stop brought me back around to a simpler device which seemed to take hints for its design from the CBxK line. The Bird Locked. What a device. Lightweight, very concealable, easy to clean, comfortable, very affordable. I loved this device. I even found a PA security cable that worked perfectly for this device and made it very secure, at least at first. I wore this device for days, and eventually worked up to 14 days without removal. What I found was this device had progressed beyond what my previous devices had offered me, but due to the fact that the device was not customized for my body, it still had its own set of problems. Sweating and chafing became an issue that was largely mitigated by appropriate lotion, especially before bed. The PA security cable began to tear at the material that the device was constructed of. The sizing was slightly too large, and because the material was so flexible, removing my PA ring and masturbation was a strong possibility. Although I could remove the device, putting it back on would prove very difficult, but due to my strict requirements for a device, this was a problem that put me back on the market for a new device.
So here I am, back at the same place I started. Strongly desiring to live a chaste life, and searching for the perfect device which would allow me to do so. My Mistress is hopeful that I will find this device soon as she strongly enjoys this lifestyle as well. Due to my line of work, I require a device that conceals 100% under tightly fitted clothing. I require a device that guarantees I will be unable to remove it without the assistance of a diamond tipped saw (or the key hopefully). Hygiene is very important due to my desire to wear 24/7. Lightweight is another must due to prior experience. I know this device must be hand crafted and built to order, which is why I have been looking at MatureMetal and Steelworxx most recently. There are a few devices on their sites which seem like they might fit the bill, but I have yet to settle on anything just yet.
My eye currently rests on a new device, one which I hope will fill my needs wholly. The Looker 03 seems to meet my current needs. It offers a locking PA "shackle", can be custom built, appears lighter weight than some devices, and has high capacity for hygiene. I am slightly worried that the PA lock will cause the device to be quite visible under clothing, and due to my inaccurate measurements previously, I am hesitant to order another expensive custom device that may not fit my needs exactly. The last matter I would like to address is the problem with erections and ball tugging/stretching. The erections do not seem preventable, and the pain (at least for me) only increases the force of my erection, which thus further increases the pain. I am going to strongly consider ordering this device, and will cross my fingers that I have measured correctly and that the device will be concealable and will not damage my anatomy. My biggest fears are that the device will be to big and not easy to hide completely under tight clothes, and second that the PA shackle will put the weight of the device on my PA piercing and will cause stretching and bleeding and discomfort. Exact measurements are an absolute necessity. Wish me luck.
Unfortunately, not one of the devices I have tried has worked "perfectly" for me, and as such I have continued to spend a substantial sum of money in the pursuit of perfection.
At first, I attempted to use the CB3k. I was very excited to receive this device, and getting to use it for the first few days was quite the learning experience. Between nighttime/morning erections, and learning to sit to pee with my new PA piercing, and discovering how best to dress to hide this new bulge in my pants. Not long after putting the device on, I learned the importance of sizing and just how dangerous it was to use pieces that were too tight or too small or even too loose. The noise of the lock banging against the cage quickly became another problem to solve. I soon began searching for a method of properly securing this device to prevent removal and ejaculation, and through multiple ventures I was inevitably unsuccessful due to either my anatomy or the incompatibility between my penis and the cage. Within 6 months I was searching for a new device.
The next device I tried was the CB6ks. A logical progression in terms of the size and added ability to conceal. The device seemed better sized for my penis and with an evolved design gave me hope that I would find the perfect device to keep me locked and secure forever. This was obviously not the case. This device had improved in several ways over the CB3k, but did not solve every problem I was having. I used this device intermittently with various security measures for about a year until it cracked in half at the seams, and soon my search again began.
I came to the realization that the only way to find perfection was to design a device using custom measurements. Enter the Lori 2b. The device pictured was not mine, but looked almost identical. I purchased with the recessed security screw, and the swinging/hinged PA pin. Before ordering, I knew in my mind that this device would surely meet every expectation I had and would perform flawlessly. Unfortunately I fell victim to my own inexperience. I measured well, but not perfectly, but this was not my undoing. The weight of this device was nothing to joke about. The pressure it put on my PA piercing was painful and problematic. Due to the design of this device, hygiene was very difficult. Because this device was hand made, it came with some imperfections. The measurements were slightly larger than my specifications which turned out to be a serious problem. I sent the device back for modification, but after an excess of $700 had been spent on this device and the keys and the 4 month waiting time for initial delivery, I learned in less than a week that this device was far too heavy, too big, and potentially very damaging for my anatomy. I was forced to sell this device and continue my search. The fault was not solely in my manufacturers hands, I made the mistake of thinking a device with this design and level of security would be perfect for every day wear, but I was very wrong.
My next stop brought me back around to a simpler device which seemed to take hints for its design from the CBxK line. The Bird Locked. What a device. Lightweight, very concealable, easy to clean, comfortable, very affordable. I loved this device. I even found a PA security cable that worked perfectly for this device and made it very secure, at least at first. I wore this device for days, and eventually worked up to 14 days without removal. What I found was this device had progressed beyond what my previous devices had offered me, but due to the fact that the device was not customized for my body, it still had its own set of problems. Sweating and chafing became an issue that was largely mitigated by appropriate lotion, especially before bed. The PA security cable began to tear at the material that the device was constructed of. The sizing was slightly too large, and because the material was so flexible, removing my PA ring and masturbation was a strong possibility. Although I could remove the device, putting it back on would prove very difficult, but due to my strict requirements for a device, this was a problem that put me back on the market for a new device.
So here I am, back at the same place I started. Strongly desiring to live a chaste life, and searching for the perfect device which would allow me to do so. My Mistress is hopeful that I will find this device soon as she strongly enjoys this lifestyle as well. Due to my line of work, I require a device that conceals 100% under tightly fitted clothing. I require a device that guarantees I will be unable to remove it without the assistance of a diamond tipped saw (or the key hopefully). Hygiene is very important due to my desire to wear 24/7. Lightweight is another must due to prior experience. I know this device must be hand crafted and built to order, which is why I have been looking at MatureMetal and Steelworxx most recently. There are a few devices on their sites which seem like they might fit the bill, but I have yet to settle on anything just yet.
My eye currently rests on a new device, one which I hope will fill my needs wholly. The Looker 03 seems to meet my current needs. It offers a locking PA "shackle", can be custom built, appears lighter weight than some devices, and has high capacity for hygiene. I am slightly worried that the PA lock will cause the device to be quite visible under clothing, and due to my inaccurate measurements previously, I am hesitant to order another expensive custom device that may not fit my needs exactly. The last matter I would like to address is the problem with erections and ball tugging/stretching. The erections do not seem preventable, and the pain (at least for me) only increases the force of my erection, which thus further increases the pain. I am going to strongly consider ordering this device, and will cross my fingers that I have measured correctly and that the device will be concealable and will not damage my anatomy. My biggest fears are that the device will be to big and not easy to hide completely under tight clothes, and second that the PA shackle will put the weight of the device on my PA piercing and will cause stretching and bleeding and discomfort. Exact measurements are an absolute necessity. Wish me luck.
