Stuck in Holy Trainer v3, please help

chastesub69

chastesub69

New member
Jul 14, 2015
2
1
3
32
So i went to unlock my device (i have both keys) and the lock won't turn. It won't budge at all. Neither keys work. I tried wd40, that didn't help. I can't use boltcutters cuz its an intergraded lock, not a padlock. I don't know what happened. How do i get out of this? Lock picking isn't an option if the keys dont work. Would drilling the key hole work? Or do i have to break the device off by cutting it or breaking it off? Really would prefer to avoid that, sounds dangerous and this thing was expensive lol. But im out of options, don't know what to do
 
  • Like
Reactions: Slave to a Goddess
its most likely the pressure or angle of the device on the lock. Try grabbing the bottom of the a ring and pushing down on the device with the same hand in a clamp like fashion, then try the key. I think moving the tube around while keeping the ring still should help you out. Some gentle moves should be all it takes and definitely dont force the key or break it.
 
  • Like
Reactions: njcuckold, Slave to a Goddess and Gryffin
If the WD40 didn't fix the problem , then there isn't any other way other then to cut thru the ring to get it off. I'm wearing The same thing and it gets oiled at least once a week. It got stuck once but the WD 40 took care of if. Good luck with getting out
 
  • Like
Reactions: njcuckold and Slave to a Goddess
Messing with the key alignment would seem to be the first option. Soaking in the bath before trying a gain would be the second. Applying wd40 and allowing it time to penetrate would be the third. Asking someone else to try as you may have just lost the knack is a possible option but not open to all...

Then its either consider permanent denial... or cutting through the base ring probably best if done on both sides.

As a prevention you really need to ensure the lock is opened cleaned and oiled then operated several times before re-use and all of that at least weekly.

My KH said not to worry if mine ever does become stuck then if at some time she does decide to let me out for anything in the future she will let me cut this one off and wear one of my old ones.
 
  • Like
Reactions: njcuckold, Slave to a Goddess, nonerect and 1 other person
Thank u for all the replies, i'll try the hot bath, and keep using the wd40 fiddling with the alignment. I'll just have to stay patient and keep working on it
 
If it comes to it a wound guitar string will cut through the resin just fine, but it might get uncomfortably warm.
 
  • Like
Reactions: Moe5
if it turns out none of the suggestions work, and before u decide to cut.
drill out the lock, there are tons of replacement locks on ebay,
 
The rate at which people are stuffing their faces with goodies waiting for an answer we are going to be getting a few heart attacks on here! And if the bolt cutters did slip, can we have a first hand report on penectomy as a viable form of staying chaste!
 
  • Like
Reactions: nonerect
Chaste J. said:
The rate at which people are stuffing their faces with goodies waiting for an answer we are going to be getting a few heart attacks on here! And if the bolt cutters did slip, can we have a first hand report on penectomy as a viable form of staying chaste!
Click to expand...

Lol! That's a riot! Lets hope it didn't turn bloody.
 
  • Like
Reactions: nonerect
You must log in or register to reply here.
Top Bottom