Neosteel arch/fun

Unlockable one? said:
That's awesome, obviously you've had it on, how's the fit, what are your thoughts and hope to see some photos.
Click to expand...
When I first tried to put it on, it was so tight I thought I'd measured it wrong, but when I bent it a little it fit.
Now I can bend it well and it fits really well.
I've been wearing it for over 24 hours now with no problems.
But the joint at the back is in a position where it touches my bone, so it has caused a cut.
I've put some urethane foam there.
Also, I'm uncircumcised, so my foreskin comes out of the hole at the end of the tube, so it hurts when I sit down and it gets caught between my foreskin and the chair. I'll think of some solution.

photos are uploaded here↓
https://www.chastitymansion.com/forums/index.php?gallery/albums/neosteel-the-fun.10096/
 
  • Like
Reactions: Desairs, MikeLocked, locked_top and 2 others
wasawasa said:
When I first tried to put it on, it was so tight I thought I'd measured it wrong, but when I bent it a little it fit.
Now I can bend it well and it fits really well.
I've been wearing it for over 24 hours now with no problems.
But the joint at the back is in a position where it touches my bone, so it has caused a cut.
I've put some urethane foam there.
Also, I'm uncircumcised, so my foreskin comes out of the hole at the end of the tube, so it hurts when I sit down and it gets caught between my foreskin and the chair. I'll think of some solution.

photos are uploaded here↓
https://www.chastitymansion.com/forums/index.php?gallery/albums/neosteel-the-fun.10096/
Click to expand...
I'd email them about the part that cut you, but looking good, hope you are very frustrated, but enjoying it.
 
  • Like
Reactions: wasawasa
wasawasa said:
When I first tried to put it on, it was so tight I thought I'd measured it wrong, but when I bent it a little it fit.
Now I can bend it well and it fits really well.
I've been wearing it for over 24 hours now with no problems.
But the joint at the back is in a position where it touches my bone, so it has caused a cut.
I've put some urethane foam there.
Also, I'm uncircumcised, so my foreskin comes out of the hole at the end of the tube, so it hurts when I sit down and it gets caught between my foreskin and the chair. I'll think of some solution.

photos are uploaded here↓
https://www.chastitymansion.com/forums/index.php?gallery/albums/neosteel-the-fun.10096/
Click to expand...

Congrats with the new belt. I have been considering Neosteel too for a long time. Just little worried about the measurements and potential being uncomfortable. One of the reasons considering a belt my foreskin gets stuck in my tube when using normal cages. The belt looks really good on you like the look something I would want have both considered Mysteel and FancySteel too. Neosteel my biggest worry to get right fit and cost. Please keep posted how it goes in your new Neosteel. They must help you if you contact neosteel just unfortunate with the long shipping distance.
 
  • Like
Reactions: wasawasa
John said:
Congrats with the new belt. I have been considering Neosteel too for a long time. Just little worried about the measurements and potential being uncomfortable. One of the reasons considering a belt my foreskin gets stuck in my tube when using normal cages. The belt looks really good on you like the look something I would want have both considered Mysteel and FancySteel too. Neosteel my biggest worry to get right fit and cost. Please keep posted how it goes in your new Neosteel. They must help you if you contact neosteel just unfortunate with the long shipping distance.
Click to expand...
Generally if you're after adjustable fit and comfort, then look at BehindBarz, they are belt able 8 weeks production.
 
John said:
Congrats with the new belt. I have been considering Neosteel too for a long time. Just little worried about the measurements and potential being uncomfortable. One of the reasons considering a belt my foreskin gets stuck in my tube when using normal cages. The belt looks really good on you like the look something I would want have both considered Mysteel and FancySteel too. Neosteel my biggest worry to get right fit and cost. Please keep posted how it goes in your new Neosteel. They must help you if you contact neosteel just unfortunate with the long shipping distance.
Click to expand...
I think you can't go wrong with the measuring kit. However, make sure to measure your hip size tightly and in the right place.
My penis has phimosis and I was worried that it would stick out of the Fun tube, but it did stick out and I got pinched and hurt.
I made a countermeasure using moldable plastic.
IMG_0977_2.jpg
IMG_0978_2.jpg
It's much more comfortable now.

As has been written here, Neosteel's response is really bad.
The response was very good from the first contact when I ordered the measuring kit until I ordered the belt, but after the original delivery date passed, I didn't get any response at all and I became very worried.
Also I still haven't received the snap lock that I ordered, so I've asked about it, but I haven't received any response.
 
  • Like
Reactions: John
wasawasa said:
I think you can't go wrong with the measuring kit. However, make sure to measure your hip size tightly and in the right place.
My penis has phimosis and I was worried that it would stick out of the Fun tube, but it did stick out and I got pinched and hurt.
I made a countermeasure using moldable plastic.
View attachment 74424
View attachment 74423
It's much more comfortable now.

As has been written here, Neosteel's response is really bad.
The response was very good from the first contact when I ordered the measuring kit until I ordered the belt, but after the original delivery date passed, I didn't get any response at all and I became very worried.
Also I still haven't received the snap lock that I ordered, so I've asked about it, but I haven't received any response.
Click to expand...
Same with me, when I made enquiries about ordering a belt, response was same day to two days, after ordering and paying a deposit, general response time went up to 2-3 weeks if so all.
 
  • Like
Reactions: John
wasawasa said:
I think you can't go wrong with the measuring kit. However, make sure to measure your hip size tightly and in the right place.
My penis has phimosis and I was worried that it would stick out of the Fun tube, but it did stick out and I got pinched and hurt.
I made a countermeasure using moldable plastic.
View attachment 74424
View attachment 74423
It's much more comfortable now.

As has been written here, Neosteel's response is really bad.
The response was very good from the first contact when I ordered the measuring kit until I ordered the belt, but after the original delivery date passed, I didn't get any response at all and I became very worried.
Also I still haven't received the snap lock that I ordered, so I've asked about it, but I haven't received any response.
Click to expand...

Hi Wasawasa, thank you for your response and advice. I pretty much have same problem as you regarding foreskin. It’s a very clever solution you found for the foreskin problem. Probably tube is a little too short since skin sticks out on the other hand it also annoying to have a too long tube. How’s your experience sitting does the it hurt in the tailbone? I heard Neosteel are slow at responding but they are a very small company husband and wife so think they will respond. I really like the look just worried about the steel belt if it’s comfortable to wear long term. Even if people say silicone belts are worse for pinching than steel from neosteel. I’m wondering the way fun is fitted if it’s natural to keep balls “up” in the body since it’s pulling backwards. I find some belts ugly when balls are hanging too much. Hope you will post more about your experience.
 
  • Like
Reactions: wasawasa
John said:
Hi Wasawasa, thank you for your response and advice. I pretty much have same problem as you regarding foreskin. It’s a very clever solution you found for the foreskin problem. Probably tube is a little too short since skin sticks out on the other hand it also annoying to have a too long tube. How’s your experience sitting does the it hurt in the tailbone? I heard Neosteel are slow at responding but they are a very small company husband and wife so think they will respond. I really like the look just worried about the steel belt if it’s comfortable to wear long term. Even if people say silicone belts are worse for pinching than steel from neosteel. I’m wondering the way fun is fitted if it’s natural to keep balls “up” in the body since it’s pulling backwards. I find some belts ugly when balls are hanging too much. Hope you will post more about your experience.
Click to expand...
Regarding sitting, hard chairs can be a little uncomfortable.
If you sit with good posture, the tube will hit the chair, so if you try to reduce this even a little, you will end up hunched over.
Regarding the position of the ball, there is no discomfort and I am not concerned at all. Although, in terms of appearance, some people may like it and others may not.
 
  • Like
Reactions: John
wasawasa said:
Regarding sitting, hard chairs can be a little uncomfortable.
If you sit with good posture, the tube will hit the chair, so if you try to reduce this even a little, you will end up hunched over.
Regarding the position of the ball, there is no discomfort and I am not concerned at all. Although, in terms of appearance, some people may like it and others may not.
Click to expand...

Thank you very good to know since it was some of the concerns I had. I mean it’s one of the most best looking belts since it’s so simple in appearance. Seen some of the best looking photos here in that exact belt. Hope you will post more here on the site.
 
  • Like
Reactions: wasawasa
Well, got an update,,,,,,,,,,,,,,,,,,,


Another two weeks,,,,,,,,,,,,,,,,,,,,,,,,

So for anyone who is looking to place an order, ignore the advertised production time, the reality is at least 5 months, with 8 months being the most likely scenario.

I'd cancel if I could, honestly, have lost faith in them.
 
  • Like
Reactions: John
the one thing i never got was the *original" access deined not the new one had a belt that had a adjustable waistline and unlike the Chinese ones your having thoughts of, this seemed to use 3/16 or 1/4 inch inch bolts the heads were inside the waist the threaded outwards into some pretty serious welded nuts outside with i recall a blind end or capped(covered) . I've not seen this since but considering at least here weight swings can vary 10-20 lbs summer to winter. depending when you ordered it, this could prove a problem i would think.
 
The end of the 180 day protection for PayPal was approaching and I told them if I had no evidence of my order being sent or complete, I'd have to lodge a case to protect my investment (they definately qualify as an investment, not chump change) and the day that I set as a deadline I get an email saying it has shipped a few days ago.

So I'm eager to see what I get.

Will update here when it arrives.
 
  • Like
Reactions: wasawasa, lockmeup4life and John
Unlockable one? said:
The end of the 180 day protection for PayPal was approaching and I told them if I had no evidence of my order being sent or complete, I'd have to lodge a case to protect my investment (they definately qualify as an investment, not chump change) and the day that I set as a deadline I get an email saying it has shipped a few days ago.

So I'm eager to see what I get.

Will update here when it arrives.
Click to expand...
Yeah, good for you. Glad you hammered the issue. Amazing what a little tiny threat can achieve
 
  • Like
Reactions: wasawasa and John
Unlockable one? said:
The end of the 180 day protection for PayPal was approaching and I told them if I had no evidence of my order being sent or complete, I'd have to lodge a case to protect my investment (they definately qualify as an investment, not chump change) and the day that I set as a deadline I get an email saying it has shipped a few days ago.

So I'm eager to see what I get.

Will update here when it arrives.
Click to expand...

Congratulations! great!
hope you get soon.
I'm waiting for your review.
 
  • Like
Reactions: John
lockmeup4life said:
Yeah, good for you. Glad you hammered the issue. Amazing what a little tiny threat can achieve
Click to expand...
People who consider themselves artist's often dinner care how long something takes, but can be motivated by setting a deadline.

I also keep a little notebook of things I've ordered ect, with start and finish dates. Something I advise everyone to do.
 
  • Like
Reactions: lockmeup4life and John
Well I have it, but as it stands I can't get the waistband to close, if it will fit I'll need to do a fair amount of bending to get it absolutely perfect or it won't fit at all.

They fun tube with the coating is great, just slip right in.
 
  • Like
Reactions: wasawasa and John
Unlockable one? said:
Well I have it, but as it stands I can't get the waistband to close, if it will fit I'll need to do a fair amount of bending to get it absolutely perfect or it won't fit at all.

They fun tube with the coating is great, just slip right in.
Click to expand...

Sounds like it’s a little too accurate will probably take some bending time to get it to fit right.
 
Unlockable one? said:
Well I have it, but as it stands I can't get the waistband to close, if it will fit I'll need to do a fair amount of bending to get it absolutely perfect or it won't fit at all.

They fun tube with the coating is great, just slip right in.
Click to expand...
It's hard to bend and fit, but do your best.
In my case, at first I thought I had made a mistake in the size, but after bending it over for a fitting, it turned out very much better.
Be careful not to bend too much around the pins, Pin be come loose.
 
wasawasa said:
It's hard to bend and fit, but do your best.
In my case, at first I thought I had made a mistake in the size, but after bending it over for a fitting, it turned out very much better.
Be careful not to bend too much around the pins, Pin be come loose.
Click to expand...
Did yours feel like it was too small?
 
John said:
Sounds like it’s a little too accurate will probably take some bending time to get it to fit right.
Click to expand...
Will have to try and get it right, as I'm not spending any more money on it. If it won't fit then I'll sell it on, I've got a BehindBarz on order.

I ordered both the standard pad lock and the snap lock, they forgot the snap lock, I've emailed them, waiting for a response.
 
  • Like
Reactions: John
You must log in or register to reply here.
Top Bottom